- Min.Order Quantity:
- Negotiation
- Price:
- Negotiation
English
English
see more +
Description
The materials are evenly spread on the mesh belt by the feeder. The mesh belt is generally made of stainless steel screen of 12-60 meshes and moves in the dryer after driven by the transmission device. The dryer is composed of several units. The hot air in each unit circulates separately. Some tail gases are discharged by the special dehumidifying fan, and waste gases are controlled by the control valve. The hot air goes through the mesh belt spread with materials from the bottom to the top or from the top to the bottom to complete the process of heat and mass transfer and bring away moisture of materials. The mesh belt will move slowly. Its running speed can be freely adjusted according to material temperature. The finished products after drying will drop into the material collector continuously. The upper and lower circulation units can be set flexibly according to user needs. The unit quantity can be decided according to the needs.
Features
1 . Contact parts made of stainless steel.
2 . Precisely cast aluminum hull, smooth surface and good performance of maintaining temperature setting
3 . Low noise blower, installed air filter with (optional) purity guaranteed
4 . Material tank installed with side glass for inspection
5 . Curve heating cylinder designed to avoid powder pile,
6 . Installed with proportional deviation display thermostat, to control temperature accurately
7 . High-temperature type for 50-1500kg available, with double-walled hopper tank, stainless steel heating tube and high-temperature blower
8 . Hopper specially designed for easy opening, suitable for all robots
Service
Send service engineer for help instruct installation.
Send service engineer for running test at site and training the operator
Help client for maintenance and repair
Provide one year spare part
Quality warranty for two years after sell
